1-800-401-2474 | support@airnavsystems.com
Forum| About| Support| Contact
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: My feed stays connected but the plane data stops  (Read 179 times)

0 Members and 1 Guest are viewing this topic.

wa2tqi

  • New Member
  • *
  • Posts: 2
My feed stays connected but the plane data stops
« on: June 29, 2019, 03:08:47 PM »
I have one Pi that supplies the raw data feed to several feeds. All of the other feeds except Radarbox are receiving plane data just fine. On my second Pi I have RBFEEDER running. When I start up the RB feed all is well. Planes appear on my local feed window. After a rather short amount of time the connection to RB remains OK and feed status turns to yellow. In order to get the feed running again I have to rerun 'rbfeeder status' on the PI sending data up to radarbox. Any ideas what could be causing this???

Bill

elTrauko

  • New Member
  • *
  • Posts: 8
Re: My feed stays connected but the plane data stops
« Reply #1 on: June 29, 2019, 03:22:19 PM »
I had the same problem, update everything fix ir.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27439
Re: My feed stays connected but the plane data stops
« Reply #2 on: June 29, 2019, 03:43:29 PM »
Yellow shows that you are online but you are not picking up any aircraft so are not sening any data.  If its not that I suggest that you contact support and ask them.

Alan