AirNav RadarBox 2009 - Installation
DO NOT CONNECT THE HARDWARE USB CABLE TO YOUR COMPUTER BEFORE INSTALLING THE SOFTWARE
If you need any help during the installation process visit AirNav Systems support page
The AirNav RadarBox system is made up of two parts.
| • | The hardware - consisting of the receiver, antenna and USB cable |
| • | The software - delivered on CD or downloaded as an update from the AirNav website |
You must install the software first. Once the software installation is complete, you can then install the hardware. RadarBox uses device drivers supplied on the CD. It is vital that these drivers are installed, otherwise RadarBox will not function. Follow the below steps to correctly install RadarBox and start tracking flights in real-time on your computer. For help in troubleshooting the driver installation, see the Troubleshooting section.
1. Run the setup.exe file located on the root folder of the provided CD. Follow registration instructions paying special attention to the User Agreement.
2. After the software installation is complete connect the USB cable from the hardware to your computer. Windows will detect that AirNav RadarBox is connected.
3. When the below windows appears, under "Can Windows connect to Windows Update for software?" select "No, not at this time". Click "Next".
4. Under "What do you want the wizard to do?" select "Install from a list or specific location (Advanced)". Click "Next".
5. Select "Search for the best driver in these locations" and then select "Include this location in the search". Browse for the folder that contains RadarBox drivers. It is located on a folder named "drivers" that is inside the folder where AirNav RadarBox software has been installed.
The standard location of the AirNav drivers is "C:\Program Files\AirNav Systems\AirNav RadarBox 2009\Drivers". Click "Next".
5. Driver installation will start. If the window below appears click "Continue Anyway".
6. If the window below appears select again the RadarBox driver folder, usually located at:
"C:\Program Files\AirNav Systems\AirNav RadarBox 2009\Drivers". Click "OK".
7. That's it! The hardware has been installed successfully. Click the "Finish" button.
