anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Signal Problems  (Read 4346 times)

0 Members and 1 Guest are viewing this topic.

thedouth

  • New Member
  • *
  • Posts: 26
Signal Problems
« on: August 19, 2016, 02:57:33 PM »
I have recently moved house . I have set up my radarbox on the second floor next to a window . I pick up hardly any planes unless the window is wide open . The window frames are steel . Would this affect my antenna signal . Any ideas please

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Signal Problems
« Reply #1 on: August 19, 2016, 03:34:41 PM »
A window frame made of steel alone won't be a problem. Unfortunately you might have a window which had been coated with a thin layer of metal to block out UV and IR radiation. This is done to reduce the "solar heating" of rooms during the summer and to keep the IR radiation in the room during the winter. Disadvantage: it blocks almost all VHF transmissions too.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

thedouth

  • New Member
  • *
  • Posts: 26
Re: Signal Problems
« Reply #2 on: August 19, 2016, 03:52:20 PM »
Could I put the antenna onto the outside of the frame and use the steel as a plate, that way the window wont have to stay wide open

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33603
Re: Signal Problems
« Reply #3 on: August 19, 2016, 04:00:27 PM »
That should be OK as long as the antenna is vertical, give it a go and see how it goes

Alan

thedouth

  • New Member
  • *
  • Posts: 26
Re: Signal Problems
« Reply #4 on: August 19, 2016, 04:05:40 PM »
Thanks Alan, I shall give it a go . How about being on the inside of the frame, Would that work also

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Signal Problems
« Reply #5 on: August 19, 2016, 04:20:23 PM »
I fear that putting it inside will result in no airframes received. But I would try it out anyway, just in case.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

thedouth

  • New Member
  • *
  • Posts: 26
Re: Signal Problems
« Reply #6 on: August 19, 2016, 04:40:30 PM »
Thanks for your replies Ingo. I will try inside and outside

Ben

thedouth

  • New Member
  • *
  • Posts: 26
Re: Signal Problems
« Reply #7 on: August 20, 2016, 08:07:06 AM »
Just to confirm that it works fine with the antenna on the outside on the window frame. Thanks for your input

Ben

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33603
Re: Signal Problems
« Reply #8 on: August 20, 2016, 08:18:44 AM »
Thanks for advising, just remember that the antenna is not weather resistant, it doesn't like rain

Alan

thedouth

  • New Member
  • *
  • Posts: 26
Re: Signal Problems
« Reply #9 on: August 20, 2016, 08:38:02 AM »
Don't worry I don't leave it out there lol

Ben