1-800-401-2474 | support@airnavsystems.com
Forum| About| Support| Contact
Welcome, Guest. Please login or register.

Login with username, password and session length
 


Author Topic: Australian & New Zealand Data Feeders  (Read 24600 times)

0 Members and 1 Guest are viewing this topic.

waituke

  • New Member
  • *
  • Posts: 21
Re: Australian & New Zealand Data Feeders
« Reply #45 on: May 29, 2016, 02:05:51 am »
Water maybe the problem. I suspect  With the weather we have had in last two weeks,  very heavy rain for days,   Any help on how to remedy that.  Will I have to replace co-ax Kevin

James Harris

  • New Member
  • *
  • Posts: 11
Re: Australian & New Zealand Data Feeders
« Reply #46 on: May 29, 2016, 02:11:18 am »
Water maybe the problem. I suspect  With the weather we have had in last two weeks,  very heavy rain for days,   Any help on how to remedy that.  Will I have to replace co-ax Kevin

Kevin,

I get the feeling it might be a faulty Radar Unit and not your Antenna at all ?

James

waituke

  • New Member
  • *
  • Posts: 21
Re: Australian & New Zealand Data Feeders
« Reply #47 on: May 29, 2016, 02:39:05 am »
James Would you know how I can return faulty box also would you know if it will be at my cost
There has been a few faulty boxes sent to New Zealand lately
Thanks for all your help

James Harris

  • New Member
  • *
  • Posts: 11
Re: Australian & New Zealand Data Feeders
« Reply #48 on: May 29, 2016, 02:45:53 am »
Hi Kevin,

Yes there have been faulty Units sent to both Australia & NZ with the very same problem you are having !!

I would contact Pedro via email as he looks after returns which will not be at your expense !!

Pedro Sousa:  psousa@airnavsystems.com

Cheers
James

waituke

  • New Member
  • *
  • Posts: 21
Re: Australian & New Zealand Data Feeders
« Reply #49 on: May 29, 2016, 03:25:25 am »
Many thanks James ..  Will do
Very frustrated
Coa
Kevin

James Harris

  • New Member
  • *
  • Posts: 11
Re: Australian & New Zealand Data Feeders
« Reply #50 on: May 29, 2016, 03:29:33 am »
Kevin,

Yes I understand how you feel and I have also sent Pedro an email in regards to your Uni as I have a full listing of all Units within Australia & NZ here.

You can also contact me via email at jh@radarbox24.com.au

Cheers
James

Runway 31

  • Database Updaters
  • Hero Member
  • *****
  • Posts: 25490
Re: Australian & New Zealand Data Feeders
« Reply #51 on: May 29, 2016, 03:38:18 pm »
Ant queries regarding support would be best sent to network@radarbox24.com.  You are better doing that as the forum isn't monitored by support.  Pedro will want to check it out to find out if its the unit or the antenna that needs replaced or if he can give advice to get it online.

Alan
« Last Edit: May 29, 2016, 03:42:34 pm by Runway 31 »

dennisg

  • New Member
  • *
  • Posts: 27
Re: Australian & New Zealand Data Feeders
« Reply #52 on: June 09, 2016, 05:23:13 am »
My new receiver is working well and giving Auckland good coverage. Seeing up to 233nm in some directions. After winter I will get the antenna raised another 2 meters which should improve coverage in some directions.

Dennis
RB300628

James Harris

  • New Member
  • *
  • Posts: 11
Re: Australian & New Zealand Data Feeders
« Reply #53 on: June 09, 2016, 05:26:13 am »
My new receiver is working well and giving Auckland good coverage. Seeing up to 233nm in some directions. After winter I will get the antenna raised another 2 meters which should improve coverage in some directions.

Dennis
RB300628

Great to hear Dennis :-)

dennisg

  • New Member
  • *
  • Posts: 27
Re: Australian & New Zealand Data Feeders
« Reply #54 on: June 09, 2016, 06:07:38 am »
Indeed it is.

On a different note, is someone able to explain how the polar diagram works in the RB system (I know what a polar diagram is). In the my station section I have seen planes fly over areas not covered by the polar diagram and then it changes. At other times I have seem planes fly a long way outside of the polar diagram but it does not change!

Dennis

neroon79

  • Hero Member
  • *****
  • Posts: 4609
Re: Australian & New Zealand Data Feeders
« Reply #55 on: June 09, 2016, 10:24:00 am »
Hi Dennis,

did the plane, outside polar diagram, move along the direction of travel or was it moving in north south direction while the airframe icon was "looking" in another direction?

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.00.000 on WIN10 64Bit Pro&Home
HW:
Antenna: outside WiMo GP-1090
AMP: Kuhne electronic KU LNA 1090 A TM
Cable: 20m of ECOFLEX 15+
Asus P53E (BIZ-Notebook) 24/7 op.
Quad Core PC with 26"+24" Screen

dennisg

  • New Member
  • *
  • Posts: 27
Re: Australian & New Zealand Data Feeders
« Reply #56 on: June 10, 2016, 09:13:06 am »
Hi Ingo,

I understand now, I watched for an hour and saw how it worked.

Cheers,

Dennis

James Harris

  • New Member
  • *
  • Posts: 11
Re: Australian & New Zealand Data Feeders
« Reply #57 on: June 11, 2016, 08:10:56 am »
If you are looking for an extension cable for your antenna here is a link to Jaycar in Australia that you might like to checkout ?

http://www.jaycar.com.au/IT-Products/Networking/Wireless-Hardware-%26-Accessories/Low-Loss-SMA-Extension-Lead-5m/p/WC7824

dennisg

  • New Member
  • *
  • Posts: 27
Re: Australian & New Zealand Data Feeders
« Reply #58 on: June 16, 2016, 08:27:54 pm »
I recently added an inline filter just before the receiver. Despite an insertion loss of around 2db it made a big improvement to reception. Long range reception increased by around 15%: short range by up to 50%.

Cheers
Dennis
RB300628

Runway 31

  • Database Updaters
  • Hero Member
  • *****
  • Posts: 25490
Re: Australian & New Zealand Data Feeders
« Reply #59 on: June 16, 2016, 08:57:45 pm »
Great news Dennis, I will pass onto Airnav

Alan