AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Error Message -Any ideas ?  (Read 2067 times)

0 Members and 1 Guest are viewing this topic.

spanman

  • Jr. Member
  • **
  • Posts: 69
Error Message -Any ideas ?
« on: December 03, 2014, 11:55:56 AM »
Hi all,
        Still having issues with my 3D .Still losing network when on 3d mode and if I try to go back to standard map I get the following message:

access violation at address 00432BDB in module 'ANRB.exe. 'Read of address 61647265.

Can anyone help me !?
Flybe Crew on the Dash 8 Q400  Embraer 175
and Embraer 195

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Error Message -Any ideas ?
« Reply #1 on: December 03, 2014, 12:24:11 PM »
Still suggest you contact support and are you on V5.00.72

Alan

spanman

  • Jr. Member
  • **
  • Posts: 69
Re: Error Message -Any ideas ?
« Reply #2 on: December 03, 2014, 01:23:22 PM »
Hi Alan I am on version 0072 and have contacted Support with the error message but no suggestions were offered
Flybe Crew on the Dash 8 Q400  Embraer 175
and Embraer 195

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Error Message -Any ideas ?
« Reply #3 on: December 03, 2014, 01:33:33 PM »
I have tried it to see if  I can get it to do the same but mines is working OK.

Did you reload the Google plug in.  The only other thing I could offer you is to reinstall the software to see if that helps cure it.

Alan

MrParanoia

  • New Member
  • *
  • Posts: 16
Re: Error Message -Any ideas ?
« Reply #4 on: December 08, 2014, 08:06:12 PM »
I've had my box just over 2 weeks now and had issues with access violation messages when switching from 3D back to 2D although I don't use the network so can't say if that was affected on my set up or not.

I had installed the software to a different partition, but reinstalling it to the default C:\Program Files (x86)\ seems to have cured the problem (despite some advice on the forum to install it anywhere but there on a 64bit system)
Radarbox 3D, GlobeS RTL1090, ModeSMixer2, UBC800XLT, UBC125XLT

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Error Message -Any ideas ?
« Reply #5 on: December 08, 2014, 08:13:20 PM »
Good to know it worked for you MrParanoia, may be handed to know if affected.

Alan