1-800-401-2474 | support@airnavsystems.com
Forum| About| Support| Contact
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: How too see 30003 port traffic from dump1090 on a linux PC  (Read 8759 times)

0 Members and 1 Guest are viewing this topic.

wschrabi

  • New Member
  • *
  • Posts: 23
How too see 30003 port traffic from dump1090 on a linux PC
« on: November 01, 2014, 08:17:35 PM »
Hi,
I have  one Linux where dump1090 runs successfully. On my 2nd PC there is WIN 7 with ARB.
Both machines are behind a firewall and on a private TCP Net (10.X.X.X) viw NAT to public TCP connected.
I can see network flight on my ARB. I also can see the TCP 30003 port MSGs from dump1090.
Is there a way to get the flights, wich sees dump1090 on my ARB? As my dump1090 is much more sensitive than my ARB. My radius is larger than my ARB radius. must by port 30003 be open to the public to feed the msgs to ARB server or to FR24 server? Thanks Walter

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #1 on: November 02, 2014, 04:14:33 PM »
Hi Walter, please contact support@airnavsystems.com with your query. dump1090 receivers are able to feed the network and support should be able to advise.

Alan

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #2 on: November 02, 2014, 04:33:34 PM »
Alan, thanks they said that ARB can not link to Radarscape. What a pitty

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #3 on: November 02, 2014, 05:49:53 PM »
Sorry to hear that Walter, I thought 1090 dongles could link to the network.

Alan

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #4 on: November 02, 2014, 06:04:58 PM »
Yes dump 1090 can link to the FlightRadar 24 fr24 network. but the AirNav Network is a standalone network, without the well know tcp30003 server-network.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #5 on: November 02, 2014, 06:11:14 PM »
I am aware that other receivers can feed the network and a lot do.  I will find out and get back to you

Alan

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #6 on: November 02, 2014, 06:56:02 PM »
Alan, well maybe I can feed to the Network via port 30003, but ARB can not use data from (!) the network. Moreover I pay every quarter 40 € to get the live data from AirNav's DataNetwork. Thanks for your effort.
Walter

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #7 on: November 02, 2014, 07:35:31 PM »
Walter,

I appear to have got things wrong, for my info what is ARB?  I thought it was RadarBox

Alan
« Last Edit: November 02, 2014, 07:37:06 PM by Runway 31 »

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #8 on: November 02, 2014, 08:45:46 PM »
Alan, yes AirnavRadarBox = ARB.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #9 on: November 03, 2014, 08:58:19 AM »
Walter,

I hope I have picked you up correctly now.  Your query is can you feed the additional traffic your 1090 receiver is picking up onto your myflights screen and the answer to that is no as this would be seen as network traffic as it is coming from outwith your RB receiver.

You can see the traffic you pick up with your RB on your screen.  If however you want to see network traffic on your RB screen you can but at a cost either for 5 minute delayed or live traffic.  You can however see network traffic on RadarBox24 at no cost as it is possible to share any 30003 port compatible data with RB24.com and the network. Support are able to provide an interface for your 1090 receiver to send the data to the network.

While you can feed the traffic you pick up with your receiver to wherever you want too, you cannot feed the network traffic outwith the RB network.

Alan
« Last Edit: November 03, 2014, 12:12:51 PM by Runway 31 »

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #10 on: November 03, 2014, 05:27:28 PM »
Allan,

yes that is correct. ARB uses a own ADB-S real time network. The ARB (= AirNav RadarBox) Software feedes the picked flights automatically up to their servers. Radarscape can be used for feeding the FlightRadar24 Network be the well know TCP 30003 port. ARB can not use that data from that ADB-S network. YOu have to pay to get live updated traffic. I have now both systems. My Radarscape and my DVB-T stick is going to feed to fr24.com network. Unfortunalty I get from my DVB-T Stick an error that the time diff is to high. So I can not feed from the Stick to fr24. But in a few days my Radarscape will arrive, so I can feed with this to fr24.com
Please tell me, if I am wrong. Thanks
Walter

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #11 on: November 03, 2014, 05:42:18 PM »
Sorry Walter I know nothing about Radarscape or how the sticks works to fed networks.  I do know that sticks can be used to feed the  ANRB network.

You are correct in that the ANRB network can only use traffic direct from receivers whether they are ANRB, SBS, sticks or whatever and cannot use traffic direct from any other network.  I would imaging other networks are the same.

You would be better asking any queries you have regarding feeding fr24 on their forum.

Alan
« Last Edit: November 03, 2014, 05:46:52 PM by Runway 31 »

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #12 on: November 03, 2014, 05:58:37 PM »
Thanks Alan, I just discovered that AirNav has also Radarbox24.com. I pay for ARB qauterly (live flights network). Do I get with this paying also access to the Radarbox24.com APP Netowork?
Would be great to see my feeded flights with my ARB in my iPAD APP.
thanks

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 27144
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #13 on: November 03, 2014, 06:10:19 PM »
Hi Walter,

Any traffic fed into the Airnav network is available on RB24 (Radarbox24.com). You can watch RB24.com for free on your Ipad.
Feeders to the Airnav network can also download and the RB24 Elite App for the Ipad/Iphone/Android for free from Apple. https://itunes.apple.com/us/app/radar-box24-elite-airplane/id672980985?mt=8

Alan
« Last Edit: November 03, 2014, 06:15:47 PM by Runway 31 »

wschrabi

  • New Member
  • *
  • Posts: 23
Re: How too see 30003 port traffic from dump1090 on a linux PC
« Reply #14 on: November 03, 2014, 06:17:38 PM »
Thanks, I am a 24hrs feeder. How can I get the Login for that? Must I use my USERNAME/Password from my ARB Software? thanks

 

SMF spam blocked by CleanTalk