anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Problem with hardware/software ?  (Read 3779 times)

0 Members and 1 Guest are viewing this topic.

MIKE.UTD

  • Full Member
  • ***
  • Posts: 200
Problem with hardware/software ?
« on: August 19, 2009, 09:42:15 PM »
Hi,
Had my AirNav for nearly 2 years now with no problems but a few strange things have started to happen.
When I switch the box on each day the map is full screen with no my interface/flight info showing.
The airport outlines sometimes come on but intermittent ?
This has never happend before.
Can someone remind me how to save my viewing options (default for my inetrface on left outlines on, no traillines etc, nothing in manual that I can see).
Anyone else had these problems ?
Thanks.
Mike.

bratters

  • Hero Member
  • *****
  • Posts: 935
Re: Problem with hardware/software ?
« Reply #1 on: August 20, 2009, 07:55:48 AM »
Hi Mike - I sometimes have similar problems where RB seems to forget everything and has its own ideas as to how your screen should look.

I have never been able to save a map that doesn't need adjusting for trailines and outlines which I prefer switched off. ON seems to be default. Try saving map as radar version - unless you use that set-up - that seems to work.

abrad41

  • Guest
Re: Problem with hardware/software ?
« Reply #2 on: August 20, 2009, 09:39:39 AM »
Don't now if anyone has seen this before.

I have just had my RB running for about 3 hrs, when i looked at it, it said hardware not connected, strange I thought, had not problems before.  So I shut down the RB and restarted the software, still the same nothing on the the screen and saying hardware not connected. So I restarted my computer and now everyhting is working as it was.

Anyone got any ideas.

Andy

bratters

  • Hero Member
  • *****
  • Posts: 935
Re: Problem with hardware/software ?
« Reply #3 on: August 20, 2009, 09:47:36 AM »
How many "problems" get resolved by re-booting PCs?

Sometimes it's just the way things are!

mike L

  • Jr. Member
  • **
  • Posts: 61
Re: Problem with hardware/software ?
« Reply #4 on: August 20, 2009, 10:33:13 AM »
watch out for windows auto update it can up set things
  mike

EMA

  • Guest
Re: Problem with hardware/software ?
« Reply #5 on: August 20, 2009, 10:56:44 AM »
Windows auto update is best left switched off.

oldun666

  • Jr. Member
  • **
  • Posts: 72
Re: Problem with hardware/software ?
« Reply #6 on: August 20, 2009, 09:26:02 PM »
try leaving rb on the screen and disconnect the usb from the back of rb it seems to shock the rb back into life like a freeveiw box best of luck   jeff