1-800-401-2474 | support@airnavsystems.com
Forum| About| Support| Contact
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Name of the antenna connector  (Read 3558 times)

0 Members and 1 Guest are viewing this topic.

Harry

  • Jr. Member
  • **
  • Posts: 98
Name of the antenna connector
« on: July 20, 2007, 05:20:16 AM »
Name of the antenna connector

Hi,

Besides the radarbox I have an SBS-1. I want to connect both boxes to the same antenna. I’m not that technical, but I thought that the SBS-1 came with a BNC connector. How is the connector called on radarbox?

Harry

Gerser

  • New Member
  • *
  • Posts: 8
Re: Name of the antenna connector
« Reply #1 on: July 20, 2007, 06:40:02 AM »
SMA connector

flightchecker

  • Guest
Re: Name of the antenna connector
« Reply #2 on: July 20, 2007, 09:35:54 AM »
Hi Harry,
do not attempt to connect both, RadarBox and SBS-1, to one antenna simultanously by meens of  a simple "T piece". You will suffer a degraded signal by mismatch effects. Proper matching can only be done by means of a "powersplitter", but unfortunatly, that will cause a "3db" (meaning half of the in-put signals "power") loss too, that you idealy have to compensate for by using preamlification ("mastpreamplifierer"), if not taking those attenuated signals into account.

Kind regards,

Karl

 

SMF spam blocked by CleanTalk