1-800-401-2474 | support@airnavsystems.com
Forum| About| Support| Contact
Welcome, Guest. Please login or register.

Login with username, password and session length

Author Topic: RBFeeder and Radarbox software  (Read 1612 times)

0 Members and 1 Guest are viewing this topic.


  • New Member
  • *
  • Posts: 2
RBFeeder and Radarbox software
« on: August 14, 2017, 12:20:13 pm »
Hello to the Forum!

I have tried having a look for this answer but with no success.

I am thinking of setting up my Raspberry PI for the RDFeeder to run 24/7. My question is if I were to install the RadarBox windows software on my PC (Windows 10 pro) could I connect to the PI via my home network to view the aircraft on my desktop rather than the RadarBox24 website?
I find the software (in demo mode) quite good and would like to use it further.

Would be most grateful for any help/pointers!

Best Regards,

Andrew Hall


  • Hero Member
  • *****
  • Posts: 4611
Re: RBFeeder and Radarbox software
« Reply #1 on: August 14, 2017, 03:12:59 pm »
Unfortunately it is not possible to connect a RPi running dump1090 (or any other feeder software) with RadarBox Windows software via LAN.

RadarBox Windows is currently working with the following options:

Classic RadarBox Hardware
RadarBox Constation via LAN (Buggy and unstable)
RadarBox Micro SDR based Stick or
any other generic R820T(2) /RTL2832U based SDR stick if alternative zadic drivers are installed on PC

Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.00.000 on WIN10 64Bit Pro&Home
Antenna: outside WiMo GP-1090
AMP: Kuhne electronic KU LNA 1090 A TM
Cable: 20m of ECOFLEX 15+
Asus P53E (BIZ-Notebook) 24/7 op.
Quad Core PC with 26"+24" Screen


  • New Member
  • *
  • Posts: 2
Re: RBFeeder and Radarbox software
« Reply #2 on: August 14, 2017, 08:50:16 pm »
Okay! Thank you for the answer to my question!

Best Regards,